strut replacement on a mazda protege
how to take off the spring and reassemble with a homemade tool.
fix
repair
replace
lesson
teach
tutorial
mazda
macphereson
strut
spring
how
howto
to
tool
homemade
Channels:
Mazda Protege
Added: 913 days ago by
deeperimage
Runtime: 01:00 |
Views: 83 |
Comments: 0
Not yet rated
How to install a new steering wheel on a FB Rx-7 (Or just about any other Car)
Today i thought i'd show you a how-to. removal and installation of a steering wheel on my 1984 Rx-7 GSL-SE. i was having a hard time getting comfurtable because of the "Big Rig" wheel. This video will show ya how to change it. you can find smaller diameter wheels all over ebay for really cheap. i think i picked up this wheel used many years ago for $20. keep in mind this method will not work on cars with air-bags, although the removal is similar you do not want that thing going off with your face right up against it. please follow the proper manuals for removal and installation.
Rx-7
steering
wheel
install
take
off
hub
mazda
DIY
how
to
mechanics
momo
Channels:
1st Gen RX-7
Added: 913 days ago by
deeperimage
Runtime: 01:00 |
Views: 104 |
Comments: 0
Not yet rated
rx7 shocks/struts replacement part1
somewhat of a how-to change shocks/struts on FC rx7.
rx7
import
struts
shocks
how
to
FC
2nd
gen
s4
Channels:
2nd Gen RX-7
Added: 913 days ago by
deeperimage
Runtime: 01:00 |
Views: 102 |
Comments: 0
Not yet rated
How to Fix a Scratch - Prep & Painting a Mazda Miata
This shows a minor scrape on a Mazda Miata. The scratch was feathered out, primed and painted using BASF paint. There are many ways to get the job done, this is what was done here: 1. The scratch was feathered out using 280 grit paper until each color was seperated around 1/2". 2. Next it was backsanded to allow space for the primer to adhere. 3. It was primed with 2 coats of Glasurit 285-10/20 direct to metal urethane primer and allowed to dry. It was primed with a devilbiss finishline HVLP gun with a 1.6 tip. 4. Next it was blocksanded using 320 paper, then final sanded with some 400-500 grit paper. Using a block is optional there but recommended. 5. After taping it up it was painted using RM Diamont basecoat in 3 coats. Each coat was allowed to flash about 5 minutes before the next one. Then 15 minutes before clearing. An Iwata LPH400 was used to apply the basecoat at about 20 psi. 6. The clear coat used here was BASF DC5335 Glamour clear. It was applied in 2 coats with about 10 minutes between coats. It was applied using an Iwata W400 with about 26 PSI at the gauge. A few dirt nibs were colorsanded and polished afterwards.
how
to
fix
scratch
paint
car
yourself
your
own
Channels:
Mazda Miata or MX-5
Added: 913 days ago by
deeperimage
Runtime: 01:00 |
Views: 85 |
Comments: 0
Not yet rated